E – 1351 Cathodic Protection Inspection and Testing

This discussion includes criteria and inspection actions that, when used either separately or in combination, will indicate whether adequate cathodic protection of a metallic piping system has been achieved. The effectiveness of cathodic protection or other corrosion control measures can be affirmed by visual observation, measurements of pipe wall thickness, or by use of internal inspection devices. Because such methods sometimes are not practical, meeting any criterion or combination of criteria in this chapter is evidence that adequate cathodic protection has been achieved. When excavations are made for any purpose, the pipe should be inspected for evidence of corrosion and/or coating condition. Apply sound engineering practices to determine the methods and frequency of testing required to satisfy these criteria. The criteria in this discussion have been developed through laboratory experiments and/or verified by evaluating data obtained from successfully operated cathodic protection systems. Situations may exist where a single criterion for evaluating the effectiveness of cathodic protection may not be satisfactory for all conditions. Often a combination of criteria is needed for a single structure.

Course Outline
1. INSPECTION PROCEDURES AND CRITERIA
2. APPLICABILITY
3. CRITERIA
4. OTHER CONSIDERATIONS
5. ALTERNATIVE REFERENCE ELECTRODES
6. TESTING

This course will give professional engineers and others an introduction to the principles and practices that are the basis of corrosion protection system testing and inspection.